How to Hang Your Kayaks in Your Garage (and Keep Them Safe)

Do you have a kayak that you love to use but don’t have enough space to store it inside If so, you’re not alone. Many people find themselves in the same situation. The good news is that there are a few different ways to hang a kayak in a garage, so you can keep your boat safe and secure without taking up too much space.

So How To Hang Kayaks In A Garage?

To hang a kayak in a garage, you will need a few tools and materials.

Tools:

Saw
Drill
Screws
Wall anchors
Tape measure
Pencil

Materials:

2x4s
Plywood
Rope

Instructions:

1. Measure the width and height of your kayak.
2. Cut two 2x4s to the same length as the width of your kayak.
3. Cut a piece of plywood to the same width as your kayak and twice as long as the height of your kayak.
4. Attach the 2x4s to the wall studs using screws.
5. Attach the plywood to the 2x4s using screws.
6. Tie a rope to the front of your kayak and the back of your kayak.
7. Hang the kayak from the rope on the plywood.

How To Hang Kayaks In A Garage

What You Need

Two sturdy wall studs
Two eye bolts or lag screws
Two carabiners
Two nylon straps
Tape measure
Level
Pencil
Drill
Screwdriver

Instructions

1. Measure the width of your kayak and mark the center point on each side.
2. Find two wall studs that are located directly above the center points of your kayak.
3. Drill two holes into the wall studs, one for each eye bolt or lag screw.
4. Insert the eye bolts or lag screws into the holes and tighten them securely.
5. Attach the carabiners to the eye bolts or lag screws.
6. Thread the nylon straps through the kayak’s carrying handles and attach them to the carabiners.
7. Tighten the nylon straps until the kayak is secure.

Tips

Make sure that the wall studs are strong enough to support the weight of the kayak.
Use a level to make sure that the kayak is hanging level.
Use nylon straps that are long enough to allow the kayak to swing freely.
Tighten the nylon straps enough to secure the kayak, but not so tight that it damages the kayak.

Conclusion

Hanging your kayak in a garage is a great way to store it when not in use. It is a relatively easy project that can be completed in just a few minutes. By following these instructions, you can safely and securely hang your kayak in your garage.

Also Read THIS: How To Hold A Kayak Paddle

FAQs: How To Hang Kayaks In A Garage

What is the best way to hang a kayak in a garage?

The best way to hang a kayak in a garage is to use a kayak hoist. A kayak hoist is a device that allows you to lift and store your kayaks off the ground, freeing up valuable space in your garage.

What are the different types of kayak hoists?

There are two main types of kayak hoists: ceiling-mounted hoists and wall-mounted hoists. Ceiling-mounted hoists are typically more expensive, but they allow you to store more kayaks than wall-mounted hoists. Wall-mounted hoists are less expensive, but they can only be used to store a limited number of kayaks.

How much does a kayak hoist cost?

The cost of a kayak hoist varies depending on the type of hoist and the weight capacity of the hoist. Ceiling-mounted hoists typically cost more than wall-mounted hoists. The average cost of a kayak hoist is between $100 and $200.

How do I install a kayak hoist?

Installing a kayak hoist is relatively simple. If you are installing a ceiling-mounted hoist, you will need to drill holes in your ceiling and attach the hoist to the ceiling joists. If you are installing a wall-mounted hoist, you will need to attach the hoist to the wall studs.

How do I use a kayak hoist?

Using a kayak hoist is easy. To lift a kayak, simply attach the kayak cradle to the hoist and lift the kayak up to the desired height. To lower the kayak, simply release the lever on the hoist.