Why Does My Pelican Kayak Have Holes In The Bottom [Disclosed]

Have you ever wondered why your Pelican kayak has holes in the bottom You’re not alone. Many people are curious about the purpose of these holes, and some are even concerned that they might leak.

The truth is, the holes in your Pelican kayak are there for a very important reason. They help to drain water from the kayak in the event of a capsize.

When a kayak capsizes, water can quickly fill the cockpit. If the kayak doesn’t have any drain holes, the water will quickly weigh the kayak down and make it difficult to right. The drain holes allow the water to escape, making it easier to right the kayak and get back in the water.

So, next time you’re wondering why your Pelican kayak has holes in the bottom, you can rest assured knowing that they’re there for a good reason. They help to keep you safe in the event of a capsize.

So, Why Does My Pelican Kayak Have Holes In The Bottom?

The holes in the bottom of your Pelican kayak are there to drain water. When you are kayaking, water will inevitably splash into the kayak. The holes allow the water to drain out so that the kayak doesn’t become too heavy and tip over.

Why Does My Pelican Kayak Have Holes In The Bottom?

What Are The Purpose Of The Holes?

The holes in the bottom of your Pelican kayak are there for a few reasons.

Drainage:

The holes allow water to drain out of the kayak quickly, which helps to keep it from becoming swamped. This is especially important if you capsize or if you are paddling in rough water.

Weight Reduction:

The holes also help to reduce the weight of the kayak, which makes it easier to carry and transport.

Stability:

The holes help to create a more stable kayak by distributing the weight of the water evenly across the bottom of the kayak. This makes it less likely to tip over.

Are The Holes A Problem?

The holes in the bottom of your Pelican kayak are not a problem. In fact, they are actually beneficial. However, if you are concerned about the holes, you can always seal them up with a sealant or epoxy.

How To Seal The Holes In Your Pelican Kayak

To seal the holes in your Pelican kayak, you will need the following materials:

A sealant or epoxy
A brush
A rag

1. Clean the area around the holes with a rag.
2. Apply a sealant or epoxy to the holes.
3. Allow the sealant or epoxy to dry completely.

Conclusion

The holes in the bottom of your Pelican kayak are there for a few reasons. They allow water to drain out of the kayak quickly, reduce the weight of the kayak, and help to create a more stable kayak. If you are concerned about the holes, you can always seal them up with a sealant or epoxy.

Also Read This: Why Is Kayak Car Rental So Cheap

FAQs

Why does my Pelican kayak have holes in the bottom?

Short answer: The holes in the bottom of a Pelican kayak are there to drain water.

Long answer: When you are kayaking, you will inevitably get water in your kayak. The holes in the bottom allow the water to drain out, so that your kayak does not become too heavy and unstable.

Will the holes in my Pelican kayak let water in?

Short answer: No, the holes in your Pelican kayak are designed to only let water out.

Long answer: The holes in a Pelican kayak are small and located in specific areas of the kayak. This design prevents water from entering the kayak, while still allowing water to drain out.

Can I plug the holes in my Pelican kayak?

Short answer: No, you should not plug the holes in your Pelican kayak.

Long answer: The holes in your Pelican kayak are there for a reason. Plugging them could prevent water from draining out, which could make your kayak unstable and dangerous.

What happens if I capsize my Pelican kayak?

Short answer: If you capsize your Pelican kayak, the water will drain out through the holes in the bottom.

Long answer: The holes in a Pelican kayak are designed to allow water to drain out quickly, even if the kayak is upside down. This means that you will be able to right your kayak and get back in it quickly and easily.

How do I clean the holes in my Pelican kayak?

Short answer: You can clean the holes in your Pelican kayak with a small brush and some water.

Long answer: Be sure to rinse the holes thoroughly after cleaning them, so that there is no soap residue left behind.